Ridgid 36345 1/2″ to 1″ Manual Ratchet Threader Set Review


Notice: Undefined offset: 1 in /home/martiala/public_html/buildingengineertraining.com/wp-content/plugins/star-rating-for-reviews/star-rating.php on line 475

Ridgid 1/2″ to 1″ Manual Ratchet Threader Set

Ridgid 36345 1/2-Inch to 1-Inch Capacity Manual Exposed Ratchet Threader Set

Ridgid pipe threader head.

This is quite the manly tool .  It is easy to use and fun to get familiar with.  It is kind of expensive in my opinion and the purchase of it shouldn’t be taken lightly.  It is highly recommended though.

Rating: ★★★★½

List Price: $229.95

Price: $219.00 + Free Shipping

You Save: $10.95 (5%)

Thread any size pipe under 1″.  Comes with the ratcheting handle, the head, thread cutting heads, cutting oil.

  • Capacity – 1/2″-1″
  • Ridgid covers its products with a lifetime warranty against defects for the life of the tool
  • Model 00-R
  • Includes: die heads, ratchet assembly, ratchet handle and alloy dies
  • Uses 12-R dies in die head

[testimonial id=’608′ template=’shortcode’]

Click here to get the Ridgid Manual Ratchet Threader Set at Amazon

Ridgid 36345 1/2″ to 1″ Manual Threader Set Description:

Ridgid manual ratchet pipe threader set

Heads, oil, handle – no case with the 1″ set though.

This is the Ridgid thread cutter, the manual version.  This is what we use to cut thread on pipe ends when you have to use custom lengths.  You just use it like a ratchet, it’s simple.  You put the proper thread cutting head into the end of the handle, slide it over your pipe, and just start screwing down.  It cuts as you go – spray some oil, go back and forth every now and then to clear it out, and you’re good to go.

I have used this pipe thread cutting tool both when in the Navy way back and for various engineering projects throughout my career so far.  If you want to check out a post of an example where I used it, click here.

Take note the tool below only goes up to 1″ so if you needed something bigger make sure you check into that.

[testimonial id=’609′ template=’shortcode’]

pipe thread cutting tool

One of the threading heads.

From the manufacturer – Ridgid

Since 1923, Ridgid has remained the symbol of certainty to dedicated professionals of the expert trades.  Every tool that bears the Ridgid brand is engineered to the same high standards of quality, strength and endurance as was that first heavy-duty pipe wrench more than 80 years ago.  Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.

Leave a Reply